Skip to content

Proffie2.2 Instructions for using the double buttons

Proffie2.2 Instructions for using the double buttons

Main button: Power button secondary press: function key

 Upper and lower button style: main button on, secondary button on below
Left and right button style: main button on the left, secondary button on the right
Turn on / off:

Make sure that the battery is installed correctly and the prompt sound is heard, and then the lightsaber is in standby mode.(It is recommended to remove the battery when not using the lightsaber)
Open sword / lightsaber: Click the main button to open or close the sword.
 Silent mode: When the sword is off, double click the main button to mute the sword.

Body sensing sword / lightsaber: quickly turn right and then turn left to open / close the lightsaber

With the lightsaber in the open state:

Blaster: Click the secondary button

FOC: Using a lightsaber to hit a collision automatically flashes white and makes a sound

Drag: Hold down the main button and hit the tip of the blade

BGM: Long press the main button to open / close the background tone

 Switch color: When the lightsaber is open, press and hold down the secondary button and quickly press the main button. After hearing the prompt sound, slowly rotate the handle to change the light effect color. Click the main button to hear the prompt sound and then exit the color switch mode

Lightsaber in standby state: adjust the volume: long press the secondary button to hear the "drop" prompt and enter the volume adjustment mode, then click the main button to turn up the volume, click the secondary button to turn down the volume, long press the secondary button again to hear the "drop" prompt and exit the volume adjustment mode.

Switch sound effects: Click the secondary button

 

Proffie Instructions for Use-Single-button

Make sure that the battery is installed correctly and the prompt sound is heard, and then the lightsaber is in standby mode.(It is recommended to remove the drain when not using the lightsaber)

Body motion open / close sword: quickly to the right and then turn the handle left to open / close the lightsaber

In standby state

On: Click the button

Turn BGM on / off: Double-click the button

Silent open sword: double click and hold the button to release

 Switch sound: release after pressing the button

Enter / exit the volume adjustment mode: press the button and tap the lightsaber to hear the "drop" prompt and enter the volume adjustment mode, then click the button to raise the volume, long press the button to lower the volume, press the button again and tap the lightsaber to hear the "drop" prompt and exit the volume adjustment mode.

Power prompt: the three-click button

In boot state

Close: Long press the button

Blaster: Click the button

Lock-up: Hold down the button and tap the lightsaber

Stab: Horizontal forward thrust

Melt: Hold the button and thrust forward

LightningBlock: Double click and hold the button and release

Drag: Hold down the button and tap on the tip of the blade

Force: The blade is up, hold down the button and quickly turn right and left to the handle

Switch the blade color: Push the blade down, press and hold the button and quickly turn the handle. After hearing the cue sound, slowly rotate the handle to change the blade color, press and hold the button again and quickly turn the handle to lock the color

Battle mode on / off: after three click button and button button