With multiple blade colors, blaster deflection, and more, our Lightsabers are full-feature. They feature smooth-swing and flash-on-clash functions to get you into the action!
Our lightsabers are available in three versions: BASELIT, Neopixel and Proffie 2.2. You can click here for more information
-
BASELIT
-
NEOPIXEL
-
Proffie 2.2
// size of product
[Handle material] aluminum alloy 6063 [blade material] concentrated PC
[Lamp belt] RGB glass fiber board lamp belt [horn] 4 O'O 2 watts
[Battery] 18650 battery 3200 mah [sword blade size] 82 / 92cm
[Usage time] about 4 hours [charging time] about 2 hours
[Sound] 27 sets (Luke / Obi-wang / Vida / Anakin / Dharma / Asoka / Karl / Yoda / Keloran / Starkiller / Dark Sword...)
[Conventional light efficiency] 9 kinds
[Ignition effects] 11 kinds
[Packaging information] Handle * 1, blade * 1, charging cable * 1, kit * 1 manual * 1
* Have a Power up prompt sound after correctly installing the battery. * Charging prompt sound when charging correctly
Single push button / / push button operation
Standby state: usually the button light is on but the blade is not on
Power on state: usually refers to the state where the button light is on and the blade light effect is on
Switch blade length 82 / 92: Turn off (button light is not on) quickly click the button three times until you hear the voice prompt
Operation is performed in the standby state
Wake up the lightsaber: long press the button until the button light is on, and then enter the standby state
Open the sword: Click the button
Adjust the volume: Long press the button to release the breathing light after flashing once
Switch the boot effect: long press the button to the breathing light flashes 2 times after release
Switch the conventional light effect: long press the button to the breathing light flashes 3 times after release
Switch sound: Long press the button and release until the breathing light flashes 4 times
Power saving mode: enter the power saving mode without operation within 10 minutes
Operation in the boot state
Blaster Shockwave: Click on the button
Flash lock-up: long press the button until the breathing light flashes 1 time before release
Switch blade color: press the button to release the breathing light 2 times
FOC off / On: Long press the button until the breathing light flashes 3 times before release
Jian: Long press the button until the breathing light flashes 4 times
Single-button / / motion-sensing operation
Operation is performed in the standby state
Open the sword: fast left turn + right turn (or right turn + left turn) handle
Switch sound: blade up, hold the button and quickly turn left + right (or right + left) handle
Switch BGM: blade down, press and hold the button and quickly turn left + right (or right + left) handle
Operation in the boot state
Close, turn left + turn right (or right turn + turn left) handle
Switch blade color: blade down, press and hold the button and quickly turn left + right (or right + left) handle
Force: blade up, hold the button and quickly turn left + right (or right + left) handle
FOC tapping: tap the lightsaber
Drag Drag the floor: hold down the button and hit the blade
Melt fuse: hold the button and stab forward
Double button / / button operation
(Upper and lower button setting: upper-main button / lower-secondary button; left and right button setting: left-main button / right-secondary button)
Switch blade length 82 / 92: Shutdown state (power off) Quickly click the main button six times until you hear the voice prompt
Operation is performed in the standby state
Open the sword: Click on the main button
Switch sound effects: Click the secondary button
Adjust volume: press the primary / secondary button to release the prompt tone, then click the main button to increase the volume mode, and click the secondary button to turn down the volume. To exit this mode, hold the main / secondary button and release the prompt
Switch the boot effect: long press the main button for 1 second after hearing the prompt sound release
Switch the conventional light effect: long press the secondary button for 1 second after hearing the prompt sound release
Shutdown (power off): Quick click the secondary button three times
Power saving mode: enter the power saving mode without operation within 10 minutes
Operation in the boot state
Guan Jian: Click on the main button
Blaster Shockwave: Click on the secondary button
Lock-up: press the secondary button for 1 second and release
FOC off / On: Turn FOC on or off after holding the main / secondary button
Dual button / / motion sensing operation
Operation is performed in the standby state