S10 / S16 instructions – CXSABER™ Skip to content

S10 / S16 instructions

S10 / S16 instructions

// size of product

[Handle material] aluminum alloy 6063 [blade material] high quality concentrated PC

[Light bead] RGB 12 watts [horn] 8 O 2 watts

[Battery] 18650 battery 2000 mah [sword blade size] 82 / 92cm

[Usage time] about 4 hours [charging time] about 2 hours

[Sound] 10-16 sets (Luke / Owen / Vida / Anakin / Dharma / Asoka / Carl / Yoda / Keloren / Starkiller / Dark Sword...)

[Blade color] 12 kinds (red / blue / yellow / green / ice blue / green / pink / orange / purple / yellow green / rose red / white)

[Conventional light efficiency] 4 (standard stable / flash blaster / ghost blade ghost / pulse pulse)

[Packaging information] Handle * 1, blade * 1, charging cable * 1, kit * 1 manual * 1

* Power-on prompt sound after installing the battery correctly * Charging prompt sound when charging correctly

Single button / / button operation mode

Standby state: usually the button light is on but the blade is not on

Power on state: usually refers to the state where the button light is on and the blade light effect is on

Operation is performed in the standby state

Wake up the lightsaber: long press the button until the button light is on, and then enter the standby state

Power on: Click the button

Adjust volume-3: Long press the button until the breathing light flashes once

Switch sound: Long press the button until the breathing light flashes 2 times and release

Switch BGM-3 sets (S16): Long press the button until the breathing light flashes 3 times before release

FOC function on / off: Long press the button until the breathing light flashes 4 times before release

Power saving mode: long press the button until the button light is off (or no operation for 10 minutes)

Operation in the boot state

Blaster Shockwave: Click on the button

Flash lock-up: long press the button until the breathing light flashes 1 time before release

Switch color: Long press the button until the breathing light flashes 2 times, and then click the button to switch the color. To exit this mode, long press the button until the breathing light flashes once before release

Shutdown: Long press the button to flash the breathing light for 4 times

Single-button / / motion-sensing operation mode

Operation is performed in the standby state

Power on: fast left turn + right turn (or right turn + left turn) handle

Switch sound: blade up, hold the button and quickly turn left + right (or right + left) handle

Switch BGM (S16): blade down, hold the button and quickly turn left + right (or right + left) handle

Operation in the boot state

Shutdown: fast left + right turn (or right + left) handle

Switch color: blade down, hold the button and quickly turn left + right (or right + left) handle

Switch light effect: Turn the blade up, press and hold the button and quickly turn left + right (or right + left) handle

FOC tapping: tap the lightsaber

Double button / / button operation mode

(Upper and lower buttons: upper-main button / lower-secondary button; left and right buttons: left-main button / right-secondary button)

Operation is performed in the standby state

Open the sword: Click the main button

Switch sound effects: Click the secondary button

Adjust the volume: press the main button for 1 second and release the cue (mute / bass / pitch)

Power saving mode: enter the power saving mode without operation within 10 minutes

Operation in the boot state

Guan Jian: Click on the main button

Blaster Guns: click the secondary button

Loclock-up lock: Long press the secondary button for 1 second

FOC off / On: Long press the main button for 1 second and then release the prompt sound

Double-button / / motion-sensing operation mode

Operation is performed in the standby state

Open the sword: fast left turn + right turn (or right turn + left turn) handle

Switch BGM: blade down, press and hold the secondary button and quickly turn left + right (or right + left) handle

Switch sound: blade up, press and hold the secondary button and quickly turn left + right (or right + left) handle

Operation in the boot state

Close, turn left + turn right (or right turn + turn left) handle

Switch light effect: blade up, hold the secondary button and quickly turn left + right (or right + left) handle

Switch color: blade down, press and hold the secondary button and quickly turn left + right (or right + left) handle

FOC tapping: tap the lightsaber